Jump to content

About This Club

We Are Node Community, Sharing Knowledge and Discussion to make PI Node one of the biggest community in the world
  1. What's new in this club
  2. Untuk menjalankan node, syarat utama harus punya Computer sesuai spec yang sudah disebutkan dan punya sambungan internet. Jadi kalau belum punya computer ambil ilmunya saja dulu untuk dipraktekkan nanti setelah punya computer
  3. Noder itu apa ya , maklumlah orang awam yang tidak mengenal apa itu noder tolong di jelaskn dgn mendetail biar faham
  4. Ajari saya, @Hendri Rahmad offline tapi... Bg pekik ajarin aku juga
  5. I'm so grateful to Mr. @Hendri Rahmat for your eternal effort... Hope this club Pi Node Community, can make Pioneers on all around the world become more and more interested to buidl Pi Network ecosystem, espescially in Pi Node...
  6. Dear All, All Chapter on Installation Node already complete. Try and Discuss here the result.. I am sure it will be interesting.. Cheers..
  7. Hello Noders, All preparatory stages have been completed. Now it's time to enter the installation stage. The required software is: 1. Node JS and Script Node JS. This is necessary to check ports inside and outside your network. To download please click the following linkhttps://nodejs.org/en/download/, and select according to your computer's OS and specifications. Install this node. After installation, copy the following script in notepad: const http = require('http'); const hostname = 'fill with your IP'; const port = 31400; const server = http.createServer((req, res) => { res.statusCode = 200; res.setHeader('Content-Type', 'text/plain'); res.end('Hello World'); }); server.listen(port, hostname, () => { console.log(`Server running at http:// fill with your IP:31400/`); }); Note: change words fill with your IP with your IP (xxx.xxx.xxx.xxx) Then, save it in .js format Saved in C:\Users\User Once saved, open cmd and run the node ports.js command, making sure that the server is running on your IP. In the web browser type http://xxx.xxx.xxx.xxx:31400/where xxx.xxx.xxx.xxx is your IP. If all goes well, the words "Hello World" will appear. Then, do this on a computer or cellphone that is on the same network as you. If you get a page that says "Hello World", then at least the port is open on your network. 2. Install Hyper V and Linux Sub System on your Windows After installing Node JS, then install Hyper V and Linux Subsystem on your windows. Open Powershell admin section, then type the following command: dism.exe /online /enable-feature /featurename:Microsoft-Windows-Subsystem-Linux /all /norestart Then, when it is 100% complete, type the next command dism.exe /online /enable-feature /featurename:VirtualMachinePlatform /all /norestart When finished 100%, then RESTART YOUR COMPUTER 3. Install WSL 2 Update After restarting, install WSL 2 Update, the software can be downloaded at docs.microsoft.com/en-us/windows/wsl/wsl2-kernel#download-the-linux-kernel-update-package. Note : No Need to install Ubuntu, kali, debian AWS, VPS etc etc️ clone.... After installing the WSL update, open the admin section of powershell. Then do the command wsl --set-default-version 2 4. Install Node PI When you have finished all the installations up to this step, then download the Pi Node onhttps://node.minepi.com/node/ , select the OS according to your computer. Run Your Pi Node on your computer, and enter the code on the PI Node to the PI application on your mobile phone. Then, you will be on the PI Node application. Click the Node icon below the lightning bolt. You are required to fill out a submission for your application. When you're done submitting the application, close your Pi Node. 5. Install Docker Docker download at https://www.docker.com/products/docker-desktop After downloading, then do the install, wait until Docker is installed and runs perfectly. Open your PI Node, click the Node section, and click continue, wait a while until you enter the page where you are asked to turn on your Node. Turn on your Node, make sure the stellar dummy server on your Node is active (in green) - see on Docker. Go to do a scan, and make sure all ports are open. Open CMD and run the following command: docker ps -a wsl -l -v The results can be shared here, so we can discuss. Don't forget to also share the Troubleshoot section on your Pi Node. And you're done, run and don't shut down At this point, I'm sure you will be confused, let's share your confusion and let's try to discuss all the problems you are facing in this installation here. Cheers, HR Pioneer ID : @Hendri2808 ------------------------------------------------------------------------------------------------------------------------------------- Halo Noders, Semua tahap persiapan telah selesai. Kini waktunya kita masuk ke dalam tahap penginstalan. Software yang diperlukan adalah : 1. Node JS dan Script Node JS. Hal ini diperlukan untuk mengecek port didalam maupun diluar network Anda. Untuk mendownload silahkan klik link berikut https://nodejs.org/en/download/ , dan pilih sesuai OS dan spesifikasi komputer Anda. Install node ini. Setelah penginstalan, copy script berikut pada notepad : const http = require('http'); const hostname = 'isi dengan IP Anda'; const port = 31400; const server = http.createServer((req, res) => { res.statusCode = 200; res.setHeader('Content-Type', 'text/plain'); res.end('Hello World'); }); server.listen(port, hostname, () => { console.log(`Server running at http:// isi dengan IP Anda:31400/`); }); Note : tukar kata isi dengan IP Anda dengan IP Anda (xxx.xxx.xxx.xxx) Lalu, di save dengan format .js Di save pada C:\Users\User Setelah di save, buka cmd dan lakukan perintah node ports.js, pastikan bahwa server running di IP anda. Pada web browser ketik http://xxx.xxx.xxx.xxx:31400/ dimana xxx.xxx.xxx.xxx adalah IP Anda. Apabila semua lancar, akan muncul tulisana “Hello World” Kemudian, lakukan hal ini pada komputer atau Handphone yang berada pada satu network dengan Anda. Apabila Anda mendapatkan halaman dengan kata “Hello World”, maka setidaknya port open di dalam network Anda. 2. Install Hyper V dan Sub Sistem Linux pada Windows Anda Setelah melakukan penginstalan Node JS, selanjutnya install Hyper V dan Sub sistemn linux pada windows Anda. Buka Powershell bagian admin, kemudian ketik perintah berikut : dism.exe /online /enable-feature /featurename:Microsoft-Windows-Subsystem-Linux /all /norestart Lalu, apabila sudah selesai 100%, ketik perintah selanjutnya dism.exe /online /enable-feature /featurename:VirtualMachinePlatform /all /norestart Setelah selesai 100%, lalu RESTART KOMPUTER ANDA 3. Install WSL 2 Update Setelah selesai Restart, maka lakukanlah penginstalan WSL 2 Update, software dapat di download di docs.microsoft.com/en-us/windows/wsl/wsl2-kernel#download-the-linux-kernel-update-package. Catatan : Tidak Perlu menginstal Ubuntu, kali, debian AWS, VPS etc etc 𝐍𝐎 cloning.... Setelah penginstalan WSL update, maka buka powershell bagian admin. Lalu lakukan perintah wsl --set-default-version 2 4. Install Node PI Apabila sudah selesai semua penginstalan sampai Langkah ini, kemudian download Pi Node pada https://node.minepi.com/node/ , pilih OS sesuai computer anda. Jalankan Pi Node Anda pada PC, dan masukkan kode Node PI pada aplikasi PI pada mobile phone Anda. Lalu, anda akan berada pada aplikasi PI Node. Klik lambang Node di bawah tanda petir. Anda diminta untuk mengisi pengajuan untuk aplikasi Anda. Setelah selesai ajukan aplikasi, tutup Pi Node Anda. 5. Install Docker Docker di download pada https://www.docker.com/products/docker-desktop Setelah mendownload, maka lakukan install, tunggu sampai Docker terinstall dan jalan sempurna. Buka PI Node Anda, klik bagian Node, dan klik continue, tunggu beberapa saat sampai Anda memasuki halaman dimana Anda diminta untuk menghidupkan Node Anda. Hidupkan Node Anda, pastikan stellar dummy server pada Node Anda aktif (berwarna hijau) - Lihat pada Docker. Pergi ke https://pi-mods.de/nodeports/ lakukan scan, dan pastikan semua port open. Buka CMD dan lakukan perintah berikut : docker ps -a wsl -l -v Hasilnya bisa share disini, biar kita bisa diskusi.. Jangan lupa share juga bagian Troubleshoot pada Pi Node Anda. Dan Anda telah selesai, jalankan dan jangan dimatikan Sampai disini, saya yakin Anda pasti akan bingung, ayo share kebingungan Anda dan kita coba diskusi semua masalah yang Anda hadapai dalam penginstalan ini disini. Salam, HR ID Pioneer : @Hendri2808
  8. Noder itu panggilan aja buat yang jalanin Noder.. hehehehe.. btw, udh coba jalanin? yuk di coba .. ga sulit sebenarnya untuk dipelajari.. @Neng reva
  9. Pioner menagis melihat ini Windows 10
  10. Well mr. Hendri You make every one can install pi node, this is basic knowledge how to setting environment before running pi node. Good job sir.
  11.  



×
×
  • Create New...